Accessory Wheels, Flanges and Wheel Adapters : DW-10

DW-10 Scotch-Brite Wheel

Scotch-Brite™ EX2 Deburring Wheel with tough aluminum oxide abrasive for an aggressive cut.  The DW-10 is a 10" diameter wheel that is 1" wide and has a 5" arbor hole.  The DW-5 is rated at 8A Med. 

Uses the FL1 flange to mount to 3/4" arbor.

The Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This wheel performs best when consistently presented with a sharp edge or metal burrs, helping to ensure a proper finish. Equip yourself with the consistent power of the Scotch-Brite™ EX2 Deburring Wheel.

The combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 Deburring Wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up, and the wheel's open web construction helps the wheel run cool and resist loading, which keeps the abrasive minerals cutting at a high-performance rate by limiting clogged fibers.

Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites

MOS is 3,600 RPM

$ 177.47

SKU :
DW-10
Quantity :


Watch this and many more helpful videos on our Youtube Channel!

  BurrKing