ACC50A: 1/4″ x 9/16″ Angle Cut Cylinder, P-40 Moderate Cut Ceramic Media

Product Overview

ACC50A is 1/4″ x 9/16″ Angle Cut Cylinder, P-40 moderate cut ceramic media for use in vibratory deburring.  Cylinders are cut at 60 degrees.

Sold in 50 lbs increments.

Ceramic media is produced by mixing clay or other vitreous materials with abrasives. Used on ferrous and non ferrous metals.  P-40 ceramic media will provide a good finish with a good media wear rate.   85-90 lbs per cubic foot

Rule of thumb for media is the faster that it cuts the quicker it will wear.

General Benefits of Ceramic Media:

  • Dense.   Ceramic media cuts faster than other blends of media.
    Synthetic 55/lbs Cu. Ft., Plastic 65/lbs. Cu. Ft., Ceramic 85/lbs. Cu Ft.
  • Aggressive cutting action
  • Works well with hard metals – Steel, stainless steel and titanium
  • Tough and durable
  • Supports heavier parts better than plastic

$200.00

SKU: ACC50A Categories: ,